Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More
Atherton Bikes’ latest additively manufactured creation is the AM.170 Enduro Bike, the development of which was steered by Dan Atherton himself. Like the AM.130 Trail Bike and AM.200 DH Bike, this too is composed of 3D printed titanium lugs joining up a girthy carbon fiber tubeset, with Dave Weagle’s DW6 suspension platform delivering its rear wheel travel.
Continuing with industry-leading sizing options, the Atherton AM.170 is available in no fewer than twenty-two sizes. Reach options span a 410mm to 530mm range, with 10mm increments separating each. Every bike has a 64° head angle, with the seat tubes getting steeper through the size range. For bikes with a reach of 450mm and upwards, there are two options that allow riders to choose their preferred head tube length (and thus stack height) and seat tube length.
“I’m so stoked on this one. This bike is genuinely our best yet! It’s most at home charging downhill but its pedaling ability surprised me from the first ride, the AM.170 is equally happy doing all day big mountain days as it is taking on the Oakley line. If I had to choose just one bike from our range to ride every weekend, this would be the one!”
The AM.170 is a dedicated mullet, with a 29″ front wheel and a 27.5″ rear. Its DW6 platform utilizes, you guessed it, 6 links to deliver 170mm of rear wheel travel, a linkage design created by Dave Weagle specifically for the titanium-lugged construction of Atherton Bikes. We are told it has “outstanding small bump sensitivity, good support in the mid-stroke while being progressive enough to accommodate the biggest of hits”.
My personal experience of the DW6 platform at Dyfi Bike Park on the AM.130.X leaves me agreeing with that statement. The AM.170 matches its rear wheel travel with a 170mm fork, but the option remains to boost that to a 180mm fork.
Here’s a Walk-Through of the AM.170 Enduro MTB from Dan Atherton, and of course a Ride-Through, if you will, featuring Charlie Hatton.
Atherton AM.170 Enduro Bike Walk-Through
“There’s no shortage of tracks here in Dyfi so this bike has been thoroughly tested on bike park jump lines, National stages of the British Enduro Series and the 20 minute+ Enduro descents that Athy has built here in the Dyfi Forest. When we head out there on a staff ride this bike is all the time.”
Dan Brown, CEO of Atherton Bikes
All Atherton Bikes are made to order in the heart of the Dyfi Valley, Wales, on their state-of-the-art additive manufacturing rig. It takes over 16 hours to 3D print all of the lugs for a single frame via the titanium laser sintering process, a quick video of more which you can read here.
Pricing & Availability
Prices for the AM.170 start from £4,500 for a frameset with the choice of a Fox DHX2 Coil or Fox Float X2 Air Shock. Custom builds are available, but to reduce decision making for those who just want to hit buy, the following three builds have been configured by Atherton Bikes… full details to follow.
AM.170.1 – £8,200
- Fox Float X2 or DHX2 Shock
- 170mm or 180mm Fox 38 Factory Fork
AM.170.2 – £7,900
- Ohlins TTX22.M2 Coil or Air Shock
- 170mm or 180mm Ohlins RXF38 Fork
AM.170.3 – £6,950
- RockShox Super Deluxe Ultimate Coil or Air Shock
- 170mm or 180mm RockShox Zeb Ultimate Fork
- SRAM GX Eagle 12-Speed Drivetrain
“I’m super impressed with the capabilities of the new AM.170, not that I didn’t think it would be good but it did exceed my expectations. It’s so stable whilst descending, it makes you just wanna go faster. It feels like a mini downhill bike but the best part is you can climb back up and do run after run”.